|
Click below to order AuroRa:
All AuroRa
Fassada Wallplates
|
AuroRa
Wireless Lighting Control Made Simple.
Create a safe path of light to, through and around your home
AuroRa is a pre-programmed, wireless, radio frequency lighting control system that provides remote control of lights in and around your
home. The AuroRa system is easy to use, simple to install and gives you control of five areas of light. Control your system lights from a tabletop master control, a wireless controller, or from individual wall
dimmers. The system is sold as a complete package and includes:
(5) Dimmers
(1) Master Control
(1) Wireless Controller
(1) Central Antenna
The remote control comes with a visor clip and operates within an approximate range of 100 feet from the central antenna.
Each AuroRa packaged system is available in White, Ivory, Almond or Light Almond. Please note that:
- Wallplates are NOT included.
You may use any traditional toggle-switch wall plate. However, we recommend that you order five of Lutron’s Fassada screwless wallplates to complement your Aurora dimmers.
- You may “bridge” two systems together.
This will allow up to ten dimmers to be controlled from your remote control. Bridging does not require any additional hardware - just the two Aurora packages.
- You may order up to nine additional remote controls.
You may download a copy of Lutron’s six-page
AuroRa brochure in Adobe format by clicking this link.
|
|
Click below to order Diva:
Full Voltage 600 Watt Single Pole
Full Voltage 600 Watt 3-Way
Full Voltage 1000 Watt Single Pole
Full Voltage 1000 Watt 3-Way
Electronic Lo-Vo 300W Single Pole
Electronic Lo-Volt 300W 3-Way
Magnetic Lo-Vo 450W Single Pole
Magnetic Lo-Vo 450W 3-Way
Magnetic Lo-Vo 800W Single Pole
Magnetic Lo-Vo 800W 3-Way
Fan Controls
|
Diva Dimmers
(Matching Fan Controls Available)
The dimmers that match
your Designer paddle switches
- Large paddle switch and small slide dimmer
- Built-in soft glow night light visible in the dark
- Available in single-pole and 3-way models
- Use with
standard 3-way switches for easy, economical installation
- Power failure memory
- Standard RFI suppression
- UL and CSA Listed
- Rated at 120VAC, 60Hz unless otherwise noted
- Order Designer Satin Color or Claro Gloss Color wallplates separately
- Order 3-way or 4-way Designer or other mechanical switches to use in conjunction with the 3-way dimmer.
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
Click below to order Maestro:
Full Voltage 600 Watt
Full Voltage 1000 Watt
Electronic Lo-Volt 600 Watt
Magnetic Lo-Volt 600 Watt
Magnetic Lo-Volt 1000 Watt
Auxillary Dimmer Full or Low Volt
Auxillary Switches Full Voltage
Auxillary Switches Low Voltage
Fan Controls Coming Soon!
|
Maestro Dimmers
(Matching Fan Controls Available)
Multi-location Smart Dimmers with Designer styling
- Full-range dimming possible from up to ten locations
- LEDs show preset light level when product is off
- Lights fade up and down smoothly allowing your eyes to adjust to changing light levels
- Ten second fade-to-off (press & hold switch) lets you leave the room before lights go out
- Standard 3-way wiring for easy installation and retrofit
- Power failure memory
- Superior RFI suppression
- UL and CSA Listed
- Rated at 120VAC, 60Hz unless otherwise noted
- Order Designer Satin Color or Claro Gloss Color wallplates separately
- Same part number serves as both single-pole or multi-location dimmer
- Use only one dimmer in each 3-way or 4-way circuit. Purchase the Maestro Accessory Dimmer or Switch for additional locations.
- Not for use with mechanical 3-way and 4-way switches
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
Click below to order Maestro-IR:
Full Voltage 600W Single Location
Full Voltage 600W Multi Location
Full Voltage 1000W Single Location
Full Voltage 1000W Multi Location
Electronic Lo-Volt Single Location
Electronic Lo-Volt Multi Location
Magnetic Lo-Volt Dimmers
Auxillary Dimmer & Switch
Hand Held Remote
|
Maestro-IR Dimmers
Smart Dimmer With Infrared Remote Control
- Adjust your lights from anywhere in the room - up to 30 feet (depending on local conditions)
- Silver button recalls your favorite light level
- Compatible with most learning remote controls
- LEDs glow softly in the dark for easy dimmer location and show preset light level when product is off
- Customizable delayed fade to off ranging from 10-60 seconds lets you leave the room before lights go out
- Full range dimming possible from up to ten locations
- Multi-location dimming compatible with 3-way wiring for easy installation and retrofit
- Power failure memory - it remembers your settings even after a power interruption
- Superior suppression of interference with radio and TV
- UL and CSA Listed
- Rated at 120VAC, 60Hz unless otherwise noted
- Order Designer Satin Color or Claro Gloss Color wallplates separately
- Available as single location or multi-location dimmer. The multi-location dimmer may be used in a single location.
- Use only one dimmer in each 3-way or 4-way circuit. Purchase the Maestro Accessory Dimmer or Switch for additional locations.
- Not for use with mechanical 3-way and 4-way switches
- Remote controls must be individually ordered.
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
 
 
Click below to order Satin:
Satin Switches Single Pole
Satin Switches 3-Way
Satin Switches 4-Way
Satin Receptacles 15 Amp
Satin Receptacles 20 Amp
Satin Recept: Both for Dimming
Satin Recept: Half for Dimming
Plugs for Dimming Receptacles
Satin GFCI Recepts 15 Amp
Satin GFCI Recepts 20 Amp
Satin Phone & Cable Jacks
Satin Wallplates
Satin Blank Inserts
Click below to order Gloss:
Gloss Switches Single Pole
Gloss Switches 3-Way
Gloss Switches 4-Way
Gloss Receptacles 15 Amp
Gloss GFCI Recepts 15 Amp
Gloss Phone & Cable Jacks
Gloss Wallplates
Gloss Blank Inserts
|
Designer Satin Color
Claro Gloss Color
Accessories that Match Diva & Maestro Dimmers
- Wallplates:
- Clean appearance. No visible screws
- Cover plate works with snap-in auto-aligning adapter plate
- Quick and easy multi-gang alignment
- Available in 1 to 6 gang configurations
- Durable polycarbonate plastic
- Precise color consistency
- UV stable color
- Paddle type switches are available as single pole, 3-way or 4-way. Rated at 15 amp, 120/277 VAC.
- Duplex Receptacles are available in 15 amp rating in both Designer and Claro series. 20 amp rating available in the Designer series only. 125 VAC.
- GFCI Duplex Receptacles are ground fault circuit interrupting with test and reset buttons and are available in 15 amp rating in both Designer and Claro series. 20 amp rating available in the Designer series only. 125 VAC.
- Dimming Application Duplex Receptacles may be wired to wall mount dimming switches. A uniquely designed receptacle face will only allow the use of specially provided plugs that must be attached to your table or floor lamp. Not available in the Claro series. Be sure to read the application notes - click here.
- Phone Jack is RJ11, 6-conductor and accepts most 4-conductor plugs
- Cable jack is F-style, 75-ohm coaxial
- UL and CSA Listed
- For phone and cable applications requiring up to six ports see the Multi-Port family
- A physical barrier (standard partition) must exist when ganging low voltage products with line-voltage products
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
Click below to order Vareo:
Full Voltage 600 Watt
Full Voltage 1000 Watt
Electronic Lo-Voltage Tapswitches
Full Voltage/Low Voltage
Magnetic Tapswitch No StatusLite
Full Voltage/Low Voltage
Magnetic Tapswitch With StatusLite
Auxillary Tapswitches
Architectural Wallplates
|
Vareo Dimmers
The Elegant Thin-Profile Tap Switch Dimmer
- Lutron's premier wallbox line
- One model number for single pole or multi-location control, full voltage or magnetic low-voltage
- Matching Tapswitches (on/off) also available
- No visible metal heatsink for improved appearance
- Hidden locator light in these dimmer colors only: White, beige, ivory and taupe. (No locator light in any of the auxillary
units).
- Automatic multigang alignment for quick and easy installation
- Heavy duty components for surge protection and long product life
- Voltage compensation
- Power failure memory
- Superior RFI suppression
- UL and CSA Listed
- Rated at 120VAC, 60Hz unless otherwise noted
- Dimmer ships with same color matte finish plate
- See Architectural Wallplates to order multigang plates
- Same part number serves as both single-pole or multi-location dimmer
- Use only one dimmer in each multi-location circuit. Purchase Vareo Auxillary Electronic Tapswitches for additional locations (tapswitches are on/off - not dimming).
- Not for use with mechanical 3-way and 4-way switches
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
Click below to order Nova-T:
Full Voltage 600W
Full Voltage 1000W
Full Voltage 1500W
Full Voltage 2000W
Electronic Lo-Volt 300W
Electronic Lo-Volt 600W
Magnetic Lo-Volt 450W
Magnetic Lo-Volt 800W
Magnetic Lo-Volt 1200W
Two Location Dimming - Base
Two Location Dimming - Remote
Fan Control 1-1/2 Amp
Fan Control 6 Amp
Fan Control 12 Amp
Switches 20Amp: SP - 3W - 4W
Duplex Receptacles 15 & 20Amp
Receptacles: Both for Dimming
Receptacles: Half for Dimming
Plugs for Dimming Receptacles
GFCI Receptacles
Isolated Ground Recept
Cable & Phone
Architectural Wallplates
Blank Inserts
|
Nova-T Dimmers
Thin-profile slide dimmers with Nova durability
- The most complete line of matching lighting controls, fan-speed controls and accessories.
- Accessories include GFCI and isolated ground duplex receptacles as well as phone and cable jacks and more
- Also available are duplex receptacles for dimming applications. Be sure to read the application notes.
- No visible metal heatsink for improved appearance
- Automatic multigang alignment for quick and easy installation
- Heavy duty components for surge protection and long product life
- Power failure memory
- Voltage compensation
- Power failure memory
- Superior RFI suppression
- UL and CSA Listed
- Rated at 120VAC, 60Hz unless otherwise noted
- Dimmer ships with same color matte finish plate
- See Architectural Wallplates to order multigang plates
- “Slide to off” dimmers are available only as single-pole units
- “Preset” dimmers serve as both single-pole and 3-way and must be used in conjunction with Nova
or other mechanical switches when used with in a 3-way or 4-way circuit.
- “Omnislide” base and auxillary units are available for two-location dimming.
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
Click below to order Ariadni:
Full Voltage 600W Single Pole
Full Voltage 600W 3-Way
Full Voltage 1000W Single Pole
Full Voltage 1000W 3-Way
Magnetic Lo-Vo 450W Single Pole
Magnetic Lo-Vo 450W 3-Way
Fan Controls
Dimmer/Fan Combo
|
Ariadni Dimmers
- The Dimmers That Match Your Toggle Switches
- Features toggle switch and small slide dimmer
- Shallow one-inch-deep back cover for easy installation
- True 3-way switching-never lose the ability to dim
- Night light models available
- Traditional Series Standard Features
- Power failure memory
- Superior RFI suppression
- UL and CSA Listed
- Rated at 120VAC, 60Hz unless otherwise noted
- Order Fassada wallplates separately
- Order 3-way or 4-way Qoto or other brand mechanical switches to use in conjunction with the 3-way dimmer.
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
Click below to order Faedra:
Full Voltage 600W Single Pole
Full Voltage 600W Multi-Location
Full Voltage 1000W Single Pole
Full Voltage 1000W Multi-Location
Electronic Lo-Volt Dimmers
Magnetic Lo-Volt Dimmers
Auxillary Dimmer & Switch
|
Faedra Dimmers
Smart Dimmers
Designed For Standard Wallplates
The Faedra Smart Dimmer is a breakthrough in technology and design. It employs the latest in technology to provide the user with many benefits previously not available in a design that utilizes a standard wallplate:
- Fits a standard "toggle opening" wallplate--no need to change your current plates or home décor
- Full-range Dimming--the rocker provides continuous full-range dimming that allows the light to be dimmed low enough to serve as a night light
- Tap Button--intuitive operation, easy tap-on, tap-off operation of the dimmer:
- One tap raises the light to the pre-selected light level allowing the user to always turn on lights to desired level
- Two taps raises the lights to full intensity
- Press and hold for a delayed fade to off. Allows user to maintain light level while they move from the room, get into bed, or safely exit the house
- Multi-location dimming--allows dimming control for one circuit or group of lights from two to ten locations. This allows the user the flexibility to
not only switch but dim from every point of control
- 6A Electronic Switches--single-location and multi-location units available for lighting loads
- Easy to Install--uses standard wiring
- Power Failure Memory--dimmer restores lights to prior level after power interruptions
- UL and CSA Listed
- Rated at 120VAC, 60Hz unless otherwise noted
- Order Fassada wallplates separately
- Order either a Single-Location of Multi-Location dimmer. Multi-location unit may be used as single-pole.
- For each Multi-location dimmer, order one or more Accessory Dimmers or Switches.
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
Click below to order Qoto:
Full Voltage 600W Single Pole
Full Voltage 600W 3-Way
Full Voltage 1000W Single Pole
Full Voltage 1000W 3-Way
Magnetic Lo-Vo 450W Single Pole
Magnetic Lo-Vo 450W 3-Way
Switches 15Amp Single Pole
Switches 15Amp 3-Way
|
Qoto
Dimmers & Switches
- A stylish design with soft lines, a unique on/off push button, and a discreet slider define the NEW Qoto dimmer from Lutron
- Designed to fit a standard wallplate opening, Qoto dimmers and switches are available in several colors to coordinate with any room décor
- Use your existing wallplates, or add a touch of elegance with Lutron's NEW Fassada Fashion Wallplates
- UL and CSA Listed
- Rated at 120VAC, 60Hz unless otherwise noted
- Order Fassada wallplates separately
- Order dimmer as single-pole or 3-way.
- Order Qoto or other brand 3-way and 4-way switches to use with the 3-way dimmer. There is no Qoto 4-way switch.
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
(Shown with six phone ports)
Click below to order MultiPort:
Designer Satin Color Frames
Claro Gloss Color Frames
Nova-T Matte Color Frames
Connectors For All Frames
|
Multi-Port Telecom
- Mounting frame provides for six openings.
- Available in Satin, Matte and Gloss colors
- Use from one to six openings
- Frames ship with six blank fillers
- Order phone, cable, BNC or fiber connector jacks as required.
- Matching Architectural, Designer or Claro wallplates must be ordered separately
- A physical barrier (standard partition) must exist when ganging with line-voltage products
|
|
Click to order
Fassada Wallplates
|
Fassada
Traditional Style Wallplates
- Clean appearance. No visible screws
- Cover plate works with snap-in auto-aligning adapter plate
- Quick and easy multi-gang alignment
- Available in 1 to 6 gang configurations
- Durable polycarbonate plastic
- Precise color consistency
- UV stable color
- May be used with traditional, other-brand toggle switches
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
Click to order
Architectural Standard Series
Wallplates
|
Architectural Wallplates
Standard Series
For use with Nova-T and Vareo Dimmers
- Clean appearance. No visible screws
- Cover plate works with snap-in auto-aligning adapter plate
- Quick and easy multi-gang alignment
- Available in 2 to 4 gang configurations. (A 1-gang plate ships with each dimmer).
- Durable polycarbonate plastic
- Precise color consistency
- UV stable color
- Dimmers must be de-rated in multi-gang configurations. See the de-rating charts.
|
|
Click to order
Rotary Dimmers
|
Rotary
Basic Old-Fashioned Dimmer
- The original solid-state dimmer introduced in 1961
- Available in single-pole and 3-way models
- 600 watts incandescent
- Electrostatic discharge tested
- Mechanical air-gap switch to disconnect load power
- RFI suppression
- UL and CSA Listed
- Rated at 120VAC, 60Hz unless otherwise noted
|
|
Click to order
Attache Dimmers
|
Attache
- Convenient feed-thru table top dimmer
- Use with table or floor lamps
- Use a standard light bulb instead of a costly 3 way
- Makes it easy to turn lights on and off without reaching under the lamp shade
- Features LEDs that glow softly as nightlights
- Power-failure memory
- RFI suppression
- Accepts standard SPT-2 lamp cords
- This is a feed-thru device and must be wired into your lamp cord.
- UL and CSA Listed
- Rated at 300 watts, 120 volts
|
|
Click to order
Credenza Dimmers
|
Credenza
- Convenient plug-in table top dimmer
- Use with table or floor lamps
- Use a standard light bulb instead of a costly 3 way
- Makes it easy to turn lights on and off without reaching under the lamp shade
- Features LEDs that glow softly as nightlights
- Power-failure memory
- RFI suppression
- Simply plug Credenza into your wall outlet and then plug your lamp into Credenza
- UL and CSA Listed
- Rated at 300 watts, 120 volts
|
